Fujitsu N3530 manual Exiting from Main Menu

L i f e B o o k N S e r i e s N o t e b o o k B I O S

Table 2: Fields, Options and Defaults for the Main Menu

Note that the parameters listed in the following table may vary depending upon your system’s configuration.

Menu Field	Options		Default	Description
Drive0	■	Auto	[Auto]	{Auto] automatically selects the Drive0 ATA/ATAPI device type. To change the
	■	Disabled		selection, press the [Enter] key to display the selections. Select [Auto] to have the
				type automatically configured by the BIOS at POST. Select [Disabled] if you don’t
				want to select a primary master.
Drive1	■	Auto	[Auto]	{Auto] automatically selects the Drive1 ATA/ATAPI device type. To change the
	■	Disabled		selection, press the [Enter] key to display the selections. Select [Auto] to have the
				type automatically configured by the BIOS at POST. Select [Disabled] if you don’t
				want to select a primary master.
Language:	___		[English]	The default setting is English.

Exiting from Main Menu

When you have finished setting the parameters on this menu, you can either exit from the setup utility, or move to another menu. If you wish to exit from the setup utility, press the [Esc] key or use the cursor keys to go to the Exit menu. If you wish to move to another menu, use the cursor keys.

6