Fujitsu N6000 Security Menu - Setting The Security Features, write protection, Enter, Main, Boot

S e c u r i t y M e n u

SECURITY MENU – SETTING THE SECURITY FEATURES

The Security menu allows you to set up the data security features of your notebook to fit your operating needs and to view the current security configuration. Follow the instructions for Navigating Through the Setup Utility to make any changes. (See Navigating Through The Setup Utility on page 2 for more information.)

The following tables show the names of the menu fields for the Security menu and its submenus, all of the options for each field, the default settings and a description of the field's function and any special information needed to help understand the field's use. The default condition is no passwords required and no

write protection.

If you set a password, write it down and keep it in a safe place. If you forget the password you will have to contact your support representative to regain access to your secured functions and data.

■Entering a password incorrectly 3 times in a row will cause the keyboard and mouse to be locked out and the warning

[System Disabled] to be displayed. If this happens restart the computer by turning off and on the power with the power switch and use the correct pass- word on reboot.

■If you make an error when re-entering the password a [Warning] will be dis- played on the screen. To try again press the Enter key and then retype the pass- word. Press the Esc key to abort the password setting process.

■If the Power Management Security is Enabled and the Password on Boot is Disabled you will not have to type your password upon resuming the system from the Suspend or Save-to-Disk modes. Power Management Security will work only if Password boot is enabled.

			PhoenixBIOS Setup Utility
	Main	Advanced	Security	Boot	Info	Exit
	Supervisor Password Is:			Clear		Item Specific Help
	User Password Is:			Clear
						Press <Enter> key to
	Set Supervisor Password			[Enter]		set Supervisor Password
	Set User Password			[Enter]		to enable any password
	Minimum User Password Length:			[0]		features.
	Password on boot:			[Disabled]		Then password entry is
	On Automatic Wake up:			[Disabled]		required to enter BIOS
	KB Lock on Resume:			[Disabled]		Setup.
	Boot from Removable Media:			[All]
	Flash Write:			[Enabled]
▲	Hard Disk Security
▲	Owner Information

F1	Help	Select	Item
ESC	Exit	Select	Menu

-/SpaceChange Values

Enter Select▲ Sub-Menu

F9 Setup Defaults

F10 Save and Exit

Figure 12. Security Menu

19