Exiting from Main Menu, Menu Field, Options

M a i n M e n u

Table 3: Fields, Options and Defaults for the Secondary Master Submenu of the Main Menu

Menu Field	Options		Default	Description


Maximum	■	Display only	–—	Displays the maximum capacity of the drive calculated from the
Capacity:				parameters of the hard disk when Auto is selected and the type
				is identified as hard disk, or User is selected.

Multi-Sector	■	Disabled	[Disabled]	This option cannot be changed when Auto is selected. Specify the
Transfers:	■	2 Sectors		number of sectors per block for multiple sector transfer.
	■	4 Sectors
	■	8 Sectors
	■	16 Sectors

LBA Mode	■	Disabled	[Disabled]	Enables or disables Logical Block Addressing in place of Cylinder,
Control:	■	Enabled		Head, Sector addressing. This option cannot be changed when Auto
				is selected.

Transfer Mode:	■	Standard	[Standard]	Selects the method for moving data to/from the drive. Autotype the
	■	Fast PIO 1		drive to select the optimum transfer mode. This option cannot be
	■	Fast PIO 2		changed when Auto is selected. Multi-word DMA is automatically
	■	Fast PIO 3		set to mode 1 for Fast PIO 1, Fast PIO 2, Fast PIO 3, and set to
	■	Fast PIO 4		mode 2 for Fast PIO 4 / DMA.
	■	FPIO 3 / DMA 1
	■	FPIO 4 / DMA 2

Ultra DMA	■	Disabled	[Disabled]	Selects the method for moving data to/from the drive. Autotype the
Mode:	■	Mode 0		drive to select the optimum transfer mode. This option cannot be
	■	Mode 1		changed when Auto is selected.
	■	Mode 2
	■	Mode 3
	■	Mode 4
	■	Mode 5

LBA Format				Logical Block Addressing (LBA)

Total Sectors:	---		---	The total number of sectors on your hard disk

Maximum	---		---	The maximum capacity of your hard disk
Capacity:

Exiting from Main Menu

When you have finished setting the parameters on this menu, you can either exit from the setup utility, or move to another menu. If you wish to exit from the setup utility, press the [Esc] key or use the cursor keys to go to the Exit menu. If you wish to move to another menu, use the cursor keys.