Fujitsu E8020D manual Serial ATA Port Selects Serial ATA Product, Port 0 submenu Number

Page 5

M a i n M e n u

Table 1: Fields, Options and Defaults for the Main Menu

Note that the parameters listed in the following table may vary depending upon your system’s configuration.

Menu Field

Options

Default

Description

 

 

 

 

 

 

 

 

Serial ATA Port 0:

Selects Serial ATA

The product

Display the type of device on this ATA/IDE interface, if there is one.

 

Port 0 submenu

number of the

Pressing the Enter key selects the Serial ATA Port 0 submenu allow-

 

 

 

ATA/IDE drive.

ing additional device configuration options for this interface.

 

 

 

 

Primary Master:

Selects Primary

The product

Display the type of device on this ATA/IDE interface, if there is one.

 

Master submenu

number of the hard

Pressing the Enter key selects the Primary Master submenu allowing

 

 

 

drive.

additional device configuration options for this interface.

 

 

 

 

 

Language:

English (US)

[English (US)]

The default setting differs between the US/European and the

 

Japanese (JP)

 

Japanese model. Selects the display language for the BIOS.

 

 

 

 

 

5

Image 5
Contents Fujitsu LifeBook Series Navigating through the Setup Utility Bios Setup UtilityEntering the Bios Setup Utility I n M e n u Fields, Options and Defaults for the Main Menu Main Menu Setting Standard System ParametersMaster submenu Number of the hard Serial ATA Port Selects Serial ATA ProductPort 0 submenu Number Serial ATA Port 0 Submenu of the Main Menu Following Setup items do not appearAuto Logical Block Addressing LBAIs selected Primary Master Submenu of the Main MenuExiting from Main Menu Transfer Mode StandardFields, Options and Defaults for the Advanced Menu Advanced Menu Setting Device Feature ControlsMain Advanced Security Boot Info Exit Ing of video signals to different displaysUSB Features CPU FeaturesTion SubClass supportSerial/Parallel Port Configuration Submenu EnabledTo set the mode for the infrared port Serial Port Disabled EnabledIs Enabled 278 27F Is Enabled 3BC 3BF InterruptKeyboard/Mouse Features Submenu of the Advanced Menu Video Features Submenu Video Features Submenu of the Advanced MenuConfiguration Enabled Internal Device Configurations Submenu of the Advanced MenuDisabled Enabled SpeedStepR Disabled Enabled CPU Features Submenu of the Advanced MenuWhen Enabled is selected, Legacy USB Emulation is enabled USB Features Submenu of the Advanced MenuKey are enabled. Note that enabling this feature may cause USB devices are available without a USB-aware OSDisabled Miscellaneous Configurations Submenu of the Advanced MenuEvent Logging Submenu Event Logging Submenu of the Advanced MenuBoot Info Exit Security Menu Setting the Security FeaturesExiting from the Security Menu Fields, Options and Defaults for the Security MenuHard Disk Security Submenu of the Security Menu Owner Information Submenu Owner Information Submenu of the Security MenuReboot Security Chip Setting Submenu of the Security MenuSecurity Chip Disabled Fields, Options and Defaults for the Boot Menu Boot Menu Selecting the Operating System SourceQuickBoot Disabled Enabled Enabled Fewer tests mean faster startup Boot-time DisabledExiting from Boot Menu Boot Device Priority Submenu of the Boot MenuCPU Speed 00 GHz Memory Slot None Fields, Options and Defaults for the Info MenuInfo Menu Displays Basic System Information Fields, Options and Defaults for the Exit Menu Exit Menu Leaving the Setup UtilityPower Off Exit Saving