Fujitsu E8010 manual Boot Device Priority Submenu of the Boot Menu, Exiting from Boot Menu

Page 27

I n f o M e n u

Boot Device Priority Submenu of the Boot Menu

The Boot Device Priority submenu is for setting the order of checking of sources for the operating system.

■Be careful of the operating environment when booting from a CD-ROM or you may overwrite files by mistake.

■A bootable CD-ROM has either a floppy disk format or a hard drive format. When the bootable CD-ROM is used, the drive allocations change automatically without changing the BIOS setup. If a floppy disk for- mat is used, the CD-ROM becomes Drive A. The CD-ROM will only take drive C: (hard drive format) if the internal hard drive is not present or is disabled. The bootable CD-ROM can never use a C: designation if a formatted internal hard drive is present since the C: designator is always reserved for the internal hard drive.The boot sequence ignores the new drive designations, however, your application software will use the new designations.

 

 

 

PhoenixBIOS Setup Utility

 

 

 

Main

Advanced

Security

Power Savings

Boot

 

 

 

 

 

 

 

Boot Device Priority

 

Item Specific Help

 

 

 

 

 

 

 

 

+Floppy Disk Drive

 

 

Keys used to view or

 

 

+Hard Disk Drive

 

 

 

 

 

 

configure devices:

 

 

CD-ROM Drive

 

 

 

 

 

 

 

 

 

 

 

 

 

<Enter> expands or

 

 

 

 

 

 

collapses devices with

 

 

 

 

 

 

a + or -.

 

 

 

 

 

 

<Ctrl+Enter> expands

 

 

 

 

 

 

all.

 

 

 

 

 

 

<Shift+1> enables or

 

 

 

 

 

 

disables a device.

 

 

 

 

 

 

<+>/<Space> or <->

 

 

 

 

 

 

moves the device up or

 

 

 

 

 

 

down.

 

 

 

 

 

 

<d> removes a device

 

 

 

 

 

 

that is not installed.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

F1 Help

Select

Item

ESC Exit

Select

Menu

-/Space

Change

Values

Enter

Select

▲ Sub-Menu

F9 Setup Defaults

F10 Save and Exit

Figure 18. Boot Device Priority Submenu

Table 18: Fields, Options and Defaults for the Boot Device Priority Submenu of the Boot Menu

Menu Field

Description

 

 

 

 

+Floppy Disk Drive

The boot selections determine the order in which the BIOS searches for the operating system during a startup

 

sequence. To view all devices related to a source, press [Enter]; to view all devices related to all sources, press

+Hard Disk Drive

[Ctrl] + [Enter]. To change the order, highlight one source by using the [up] or [down] cursor keys and then

CD-ROM Drive

press the [+] or [-] key to change the order number. [Shift] + [1] enables a device.Tapping [d] removes from

the list a device that is not installed.Be sure to save your changed order when you exit the BIOS setup utility.

 

NOTE: Be aware that if you use the CD-ROM drive as the first boot device, certain files may be overwritten,

 

depending upon your operating environment.

 

 

Exiting from Boot Menu

When you have finished setting the boot parameters with the Boot Menu, you can either exit from the setup utility or move to another menu. If you wish to exit from the setup utility press the [Esc] key to go to the Exit Menu. If you wish to move to another menu, use the cursor keys.

27

Page 26 Page 28
Image 27
Page 26 Page 28
Contents Fujitsu LifeBook Series Bios Setup Utility Entering the Bios Setup UtilityNavigating through the Setup Utility I n M e n u Fields, Options and Defaults for the Main Menu Main Menu Setting Standard System ParametersSelects Secondary Auto Primary Master Submenu of the Main MenuSectors Number between Transfer Mode Standard MultiwordHeads Number between Typing in the numberSecondary Master Submenu of the Main Menu Type Auto None Spacebar to cycle through the selectionsHard Disk Exiting from Main Menu Transfer Mode StandardTo different displays Advanced Menu Setting Device Feature ControlsFields, Options and Defaults for the Advanced Menu Main Advanced Security Boot Info ExitMiscellaneous Serial/Parallel Port Configuration Submenu Enabled278 27F Is Enabled 3BC 3BF Interrupt Serial Port Disabled EnabledTo set the mode for the infrared port Is EnabledKeyboard/Mouse Features Submenu of the Advanced Menu Video Features Submenu Video Features Submenu of the Advanced MenuBoth Internal Device Configurations Submenu of the Advanced MenuSpeedStepR Disabled Enabled CPU Features Submenu of the Advanced MenuUSB devices are available without a USB-aware OS USB Features Submenu of the Advanced MenuWhen Enabled is selected, Legacy USB Emulation is enabled Key are enabled. Note that enabling this feature may causeDisabled Miscellaneous Configurations Submenu of the Advanced MenuEvent Logging Submenu Event Logging Submenu of the Advanced MenuBoot Info Exit Security Menu Setting the Security FeaturesExiting from the Security Menu Fields, Options and Defaults for the Security MenuHard Disk Security Submenu of the Security Menu Owner Information Submenu Owner Information Submenu of the Security MenuSecurity Chip Setting Submenu of the Security Menu Security Chip DisabledReboot Enabled Fewer tests mean faster startup Boot-time Disabled Boot Menu Selecting the Operating System SourceFields, Options and Defaults for the Boot Menu QuickBoot Disabled EnabledExiting from Boot Menu Boot Device Priority Submenu of the Boot MenuFields, Options and Defaults for the Info Menu Info Menu Displays Basic System InformationCPU Speed 60 GHz Memory Slot None Changes Exit Menu Leaving the Setup UtilityFields, Options and Defaults for the Exit Menu Exit Saving
Top Page Image Contents