Fujitsu E8010 manual Selects Secondary

Page 5

M a i n M e n u

Table 1: Fields, Options and Defaults for the Main Menu

Note that the parameters listed in the following table may vary depending upon your system’s configuration.

Menu Field	Options		Default	Description


Primary Master:	■	Selects Primary	The product	Display the type of device on this ATA/ATAPI interface, if there is
		Master submenu	number of the hard	one. Pressing the Enter key selects the Primary Master submenu
			drive.	allowing additional device configuration options for this interface.

Secondary Master	■	Selects Secondary	The product num-	Display the type of device on this ATA/ATAPI interface, if there is
		Master submenu	ber of the	one. Pressing the Enter key selects the Secondary Master submenu
			CD-ROM drive.	allowing additional device configuration options for this interface

Language:	■	English (US)	[English (US)]	The default setting differs between the US/European and the
	■	Japanese (JP)		Japanese model. Selects the display language for the BIOS.

Image 5

Contents Fujitsu LifeBook Series Navigating through the Setup Utility Bios Setup UtilityEntering the Bios Setup Utility I n M e n u Fields, Options and Defaults for the Main Menu Main Menu Setting Standard System ParametersSelects Secondary Auto Primary Master Submenu of the Main MenuHeads Number between Transfer Mode Standard MultiwordTyping in the number Sectors Number betweenHard Disk Secondary Master Submenu of the Main MenuType Auto None Spacebar to cycle through the selections Exiting from Main Menu Transfer Mode StandardFields, Options and Defaults for the Advanced Menu Advanced Menu Setting Device Feature ControlsMain Advanced Security Boot Info Exit To different displaysMiscellaneous Serial/Parallel Port Configuration Submenu EnabledTo set the mode for the infrared port Serial Port Disabled EnabledIs Enabled 278 27F Is Enabled 3BC 3BF InterruptKeyboard/Mouse Features Submenu of the Advanced Menu Video Features Submenu Video Features Submenu of the Advanced MenuBoth Internal Device Configurations Submenu of the Advanced MenuSpeedStepR Disabled Enabled CPU Features Submenu of the Advanced MenuWhen Enabled is selected, Legacy USB Emulation is enabled USB Features Submenu of the Advanced MenuKey are enabled. Note that enabling this feature may cause USB devices are available without a USB-aware OSDisabled Miscellaneous Configurations Submenu of the Advanced MenuEvent Logging Submenu Event Logging Submenu of the Advanced MenuBoot Info Exit Security Menu Setting the Security FeaturesExiting from the Security Menu Fields, Options and Defaults for the Security MenuHard Disk Security Submenu of the Security Menu Owner Information Submenu Owner Information Submenu of the Security MenuReboot Security Chip Setting Submenu of the Security MenuSecurity Chip Disabled Fields, Options and Defaults for the Boot Menu Boot Menu Selecting the Operating System SourceQuickBoot Disabled Enabled Enabled Fewer tests mean faster startup Boot-time DisabledExiting from Boot Menu Boot Device Priority Submenu of the Boot MenuCPU Speed 60 GHz Memory Slot None Fields, Options and Defaults for the Info MenuInfo Menu Displays Basic System Information Fields, Options and Defaults for the Exit Menu Exit Menu Leaving the Setup UtilityExit Saving Changes