Fujitsu C1320D manual Primary Master Submenu of the Main Menu, Auto, Enter

M a i n M e n u

Primary Master Submenu of the Main Menu

The Primary Master submenu identifies what primary devices are installed.

Note that actual hard drive label shown may vary. Depending on the drive type, information such as cylin- ders, heads and sectors may also be displayed.

PhoenixBIOS Setup Utility

Main

Primary Master [UJDA760 DVD/CDRW-(PM)]		Item Specific Help
Type:	[Auto]	Select Serial ATA/IDE
		drive installed here.
Multi-Sector Transfers:	[Disabled]
LBA Mode Control:	[Disabled]	[Auto]
Transfer Mode:	[Standard]	The BIOS auto-types the
Ultra DMA Mode:	[Disabled]	drive on boot time.
		[None]
		The drive is disabled.

F1	Help	Select	Item
ESC	Exit	Select	Menu

-/Space	Change	Values
Enter	Select	▲ Sub-Menu

F9 Setup Defaults

F10 Save and Exit

Figure 3. Primary Master Submenu

Menu Field	Options	Default	Description
Type:	• Auto	[Auto]	Selects the Serial ATA/IDE device type. Select Auto to have the type
	• None		automatically identified by the BIOS at POST. If None is selected, all of
			the following Set-up items do not appear.
Multi-Sector	• Disabled	[Disabled]	The best option is selected by the BIOS automatically when Auto is
Transfers:	• 2 Sectors		selected and cannot be selected by the user. Specifies the number of
	• 4 Sectors		sectors per block for multiple sector transfer.
	• 8 Sectors
	• 16 Sectors
LBA Mode	• Disabled	[Disabled]	The best option is selected by the BIOS automatically when Auto is
Control:	• Enabled		selected and cannot be selected by the user. Enables or disables Logi-
			cal Block Addressing in place of Cylinder, Head, Sector addressing.

7