Fujitsu C1320D manual Product #, Port Port 0 submenu Serial ATA/IDE Drive

Page 5

M a i n M e n u

Table 1: Fields, Options and Defaults for the Main Menu

Note that the parameters listed below may differ, as determined by your system configuration.

Menu

Options

Default

Description

Field

 

 

 

 

 

 

 

System

–—

–—

Sets and displays the current date. Date is in a month/

Date:

 

 

day/year numeric format with 2 digits each for month

 

 

 

and day and 4 digits for year. (MM/DD/YYYY) for

 

 

 

example: 10/16/2001. You may change each segment

 

 

 

of the date separately. Move between the segments

 

 

 

with the [Tab] key and/or [Shift] + [Tab] keys.

 

 

 

 

Serial ATA

Selects the Serial ATA

The product # of the

Display the type of device on this ATA/ATAPI interface,

Port 0

Port 0 submenu.

Serial ATA/IDE Drive

if there is one. Pressing the Enter key selects the Serial

 

 

 

ATA Port 0 submenu allowing additional device config-

 

 

 

uration options for this interface.

 

 

 

 

Primary

Selects Primary

The product # of the

Display the type of device on this ATA/ATAPI interface,

Master:

Master submenu

Hard Drive

if there is one. Pressing the Enter key selects the Pri-

 

 

 

mary Master submenu allowing additional device con-

 

 

 

figuration options for this interface.

 

 

 

 

Language:

English (US)

[English (US)]

The default setting differs between the US/European

 

Japanese (JP)

 

and the Japanese model. Selects the display language

 

 

 

for the BIOS.

 

 

 

 

5

Image 5
Contents Fujitsu LifeBook Series Navigating through the Setup Utility Bios Setup UtilityEntering the Bios Setup Utility E r i e s B I O S Menu Options Default Description Field Main Menu Setting Standard System ParametersFields, Options and Defaults for the Main Menu Port Port 0 submenu Serial ATA/IDE Drive Product #Uration options for this interface Primary Selects Primary Product #Serial ATA Port 0 Submenu of the Main Menu Menu Field Options Default DescriptionEnter Primary Master Submenu of the Main MenuAuto Exiting from Main Menu ESC Exit Advanced Menu Setting Device Feature ControlsMain Advanced Security Boot Info Exit Menu Field Description Fields, Options and Defaults for the Advanced MenuSerial/Parallel Port Floppy EmulationAll I/O addresses in are in hexadecimal EnabledInfrared Port Disabled Enabled IRQ Serial port is EnabledAuto Operating system configures the port Mode IrDA 2F8 2FF Infrared port is Enabled 3E8 3EF 2E8 2EFPrinter or similar device. ECP Mode allows communication 480 4BF Fast Infrared FIR port is Enabled 500 53F 580 5BFDevice documentation for the proper setting 278 27F Parallel port is Enabled 3BC 3BF Interrupt IRQAbles the internal pointing device, respectively Keyboard/Mouse Features Submenu of the Advanced MenuDisplay Internal Flat Panel Auto Video Features Submenu of the Advanced MenuExternal Analog Image to fill the screenEnables or disables serial ATA devices Internal Device Configurations Submenu of the Advanced MenuEnables or disables the Ahci Advanced Host Controller Controller is disabledCPU Features Submenu of the Advanced Menu USB Features Submenu of the Advanced Menu Disabled Miscellaneous Configurations Submenu of the Advanced MenuHaving been read Event Logging Submenu of the Advanced MenuBoot Info Exit Security Menu Setting the Security FeaturesFields, Options and Defaults for the Security Menu Hard Disk Security Submenu of the Security Menu Power Savings ExitExiting from the Security Menu Owner Information Submenu of the Security MenuFields, Options and Defaults for the Boot Menu Boot Menu Selecting the Operating System SourceSelects Boot Device Priority submenu+Floppy Disk Drive Boot Device Priority Submenu of the Boot Menu+Hard Disk Drive CD-ROM DriveExiting from Boot Menu Boot Info Exit Fields, Options and Defaults for the Info MenuMenu Field Default Info Menu Displays Basic System InformationMenu Field Keyboard Description Shortcut Exit Menu Leaving the Setup UtilityFields, Options and Defaults for the Exit Menu Save