Fujitsu B6210 manual Drive0 Submenu of the Main Menu, LBA Format Logical Block Addressing LBA

L i f e B o o k B S e r i e s N o t e b o o k B I O S

Drive0 Submenu of the Main Menu

The Drive0 submenu identifies what serial ATA/IDE devices are installed.

Note: Actual hard drive label shown may vary. Depending on the drive type, information such as cylinders, heads and sectors may or may not be displayed.

		PhoenixBIOS Setup Utility
Main	Advanced	Security			Power	Boot	Info	Exit
	Drive0 [TOSHIBA MK6025GAS]							Item Specific Help
Type:			[				Select Serial ATA/IDE
				Auto]
		LBA Format					drive installed here.
Total Sectors::			117210240				[Auto]
Maximum Capacity:			60012MB
							The BIOS auto-types the
Multi-Sector Transfers:			[16 Sectors]				drive on boot time.
LBA Mode Control:			[Enabled]				[None]
Transfer Mode:			[Multiword DMA 2]
Ultra DMA Mode:			[Disabled]				The drive is disabled.

F1 Help	Select	Item
ESC Exit	Select	Menu

-/SpaceChange Values

Enter Select ▲ Sub-Menu

F9 Setup Defaults

F10 Save and Exit

			Figure 2. Drive0 Submenu
Table 2: Fields, Options and Defaults for the Drive0 Submenu of the Main Menu
Menu Field	Options	Default	Description
Type:	• Auto	[Auto]	Selects the ATA/IDE device type. Select Auto to have the type automatically
	• None		identified by the BIOS at POST. If None is selected, none of the following
			Set-up items appear. To toggle between Auto and None press the spacebar.
LBA Format			Logical Block Addressing (LBA)
Total Sectors:	___	___	The total number of sectors on your hard disk
Maximum	___	___	The maximum capacity of your hard disk
Capacity:
Multi-Sector	___	[16 Sectors]	This option cannot be changed when Auto is selected; it is automatically
Transfers:			selected.
LBA Mode	___	[Enabled]	Enables or disables logical Block Addressing in place of Cylinder, Head, Sec-
Control:			tor addressing. This option cannot be changed when Auto is selected; it is
			automatically selected.

6