Fujitsu A6010 manual Hard Disk Security Submenu of the Security Menu

L i f e B o o k A S e r i e s B I O S

Hard Disk Security Submenu of the Security Menu

The Hard Disk Security submenu is for configuring hard disk security features.

PhoenixBIOS Setup Utility

Main Advanced Security Power Savings Exit

Hard Disk Security

Item Specific Help

Drive0 Password Is: Clear

Set Drive0 Password: [Enter]

Password Entry on Boot: [Enabled]

F1 Help	Select	Item	-/Space	Change	Values
ESC Exit	Select	Menu	Enter	Select	▲ Sub-Menu

Figure 13. Hard Disk Security Submenu

F9 Setup Defaults

F10 Save and Exit

Table 13: Fields, Options and Defaults for the Hard Disk Security Submenu of the Security Menu

Menu Field	Options		Default	Description
Drive0 Password Is:	___		Clear	Display-only. Default is Clear. When the Drive0 Password has been set, the field
				changes to Set. When this password is set, the primary hard disk drive cannot be
				used in another system unless the password is entered.
Set Drive0	___		[Enter]	Sets, changes or cancels the Drive0 Master Password. The Drive0 Master Password
Password				may be up to seven characters long and must include only letters or numbers (no
				symbols). Passwords are NOT case-sensitive. When a Drive0 Master Password is set,
				it must be used to access the hard drive if it is used in another system. Note that the
				password will not take effect until the system has been rebooted.
Password Entry on	■	Disabled	[Enabled]	When set to disabled, entry of a Hard Disk Password is not required before OS boot.
Boot:	■	Enabled		(The hard disk is still password-protected without password entry.)

20