IBM FTP Adapter manual Code Page Local -CPL, Code Page Remote -CPR

Chapter 3 - FTP Commands List of Commands

Code Page Local (-CPL)

Use the Code Page Local adapter command (-CPL) to specify the code page of the data on the local system (the system on which Mercator is running).

Use this command in conjunction with the TYPE=ASCII feature of the –URL

command. This command must be used if the Code Page Remote adapter command (-CPR) is specified.

This command is only valid on OS/390 and z/OS systems. The default value is the default EBCDIC code page for your system.

-CPLcode_page_name

OptionDescription

code_page_name Specify the code page name of the data on the local system.

See IBM publication "OS/390: C/C++ Run-Time Library Reference" (SC28-1663) function __atoe_l or go to http://publibz.boulder.ibm.com/cgi-

bin/bookmgr_OS390/BOOKS/EDCLB130/3.50?SHELF=CBCBS130&DT=200206201 75922 for more information.

Code Page Remote (-CPR)

Use the Code Page Remote adapter command (-CPR) to specify the code page of

the data on the remote system to which, or from which the data is being transferred.

Use this command in conjunction with the TYPE=ASCII feature of the –URL

command. This command must be used if the Code Page Local adapter command (-CPL) is specified.

This command is only valid on OS/390 and z/OS systems. The default value is ISO 8859-1.

-CPRcode_page_name

OptionDescription

code_page_name Specify the code page name of the data on the local system.

F T P A d a p t e r R e f e r e n c e G u i d e

1 3