Step 9. Run the Configuration Wizard
❑Double-click the Enterprise Fabric Suite 2007 shortcut, or select Enterprise Fabric Suite 2007 from Start menu, depending on how you installed it.
❑The Configuration Wizard tool auto-detects and configures the switch based on selected options and recommended settings. Follow the instructions to set network parameters and the password. The default user name is admin; the default password is password.
NOTE: If you are using an Ethernet switch and the auto-connect process fails due to a time out, try a direct connection from your workstation to the switch using an Ethernet cross-over cable.
Step 10. Connect Devices and Switches
❑Connect fiber optic cables between the installed transceivers and their corresponding devices. Each port auto-negotiates the proper port type with the connected device or switch.
Congratulations
You have successfully installed your QLogic SANbox 9000 Series Switch
