Upgrading main memory
These slots are suitable for DIMM format 32, 64, 128, 256, 512, 1024 MB SDRAM memory modules.
Memory modules with different memory capacities can be combined.
You may only use unbuffered 3.3 V memory modules. Buffered memory modules are not ! supported.
SDRAM memory modules must meet the PC133 specification.
Installing a memory module
2
2
ÊPush the holders on each side of the memory compartment outwards.
ÊInsert the memory module into the location (1).
ÊAt the same time flip the lateral holders upwards until the memory module snaps in place (2).
Removing a memory module
1
1
ÊPush the clips on the right and left of the compartment outward (1).
ÊCarefully remove the memory module from the compartment (2).
10 - English |