Features
Hard disk connection
An ultra ATA/66 or ultra ATA/100 hard disk must be connected with a cable especially designed for the ultra ATA/66or ultra ATA/100 mode.
ÊConnect the end of the cable marked with blue to the system board.
LAN connector
This system board has an optional Intel 82550ET LAN controller which supports transfer speeds of 10 Mbit/s and 100 Mbit/s. The LAN controller is equipped with a 3 KB transmission and receiving buffer (FIFO) and supports WOL function through Magic Packet.
It is also possible to boot a device without its own boot hard disk via LAN. Here Bootix LAN BootP and Intel PXE are supported.
The LAN RJ45 connector is equipped with a yellow and a green LED (light emitting diode).
|
|
|
|
| 1 = | Yellow indicator |
|
|
|
|
| 2 = | Green indicator |
| 2 |
|
| 1 |
|
|
|
|
|
|
|
| |
Yellow | a connection exists (e.g. to a hub). |
| ||||
Green | Link Mode: | the LAN connection is active. | ||||
| WOL mode: | a Magic PacketTM is being received. | ||||
PCI bus interrupts
The following table shows which PCI bus interrupts are assigned on the system board.
PCI bus interrupt | Component on system board: |
B, C, D, A | PCI bus slot 1 |
C, D, A, B | PCI bus slot 2 |
D, A, B, C | PCI bus slot 3 |
A, B | AGP slot |
D | First USB controller |
H | Second USB controller |
E | LAN controller |
B | SMBus |
B | AC'97 Audio |
6 - English |