Panasonic WV-CLR920A Auto Iris Lens Connector, Flange-back Adjusting Ring FB, Down Button K

qAuto Iris Lens Connector

This connector is used to connect the auto iris lens with a 4-pin male connector supplied as a standard accessory (Part No. YFE4191J100).

wFlange-back Adjusting Ring (FB)

This ring is used to adjust the back focal length or picture focus. Rotate this ring upward or downward for a CS-mount lens. In case of using a C-mount lens, adjust it with the C-mount adapter.

eLens (Option)

rFocus Fixing Screw (LOCK)

tCamera Mounting Screw Hole

This hole is used to mount the camera onto a mounting bracket.

yDown Button (K)

This button is used to move the cursor downward. It is also used to select items in the CAM SET UP menu.

uRight Button (M)

This button is used to move the cursor to the right. It is also used to select the mode and can be used to adjust some levels.

iLeft Button (L)

This button is used to move the cursor to the left. It is also used to select the mode and can be used to adjust some levels.

oUp Button (J)

This button is used to move the cursor upward. It is also used to select items in the CAM SET UP menu.

!0Set Button (I)

This button is used to activate an item selected in the CAM SET UP menu.

!1Gen-lock Termination Switch (Hi-Z, G/L 75Ω)

Set this switch to Hi-Z when a gen-lock video input signal is looped through. In all other cases, set this switch to 75 Ω.

!2RS-485 Termination Switch (Hi-Z, RS485 LINE

TERM)

This switch is used to terminate of the RS485 termi- nal. Normally keep it LINE TERM position.

!3Full duplex/Half duplex Selection Switches (4-LINE/2-LINE)

These triple switches are used to select either full duplex (left side) or half duplex (right side) for the communication lines.

-10-