4.5 Selectable Bay Module 4 Replacement Procedures
TECRA S1 Maintenance Manual 4-29
Disassembling the DVD-ROM Drive
NOTE: Do not disassemble the DVD-ROM drive when it is working normally.
Disassemble or replace the DVD-ROM drive only if it failed.
Disassemble the DVD-ROM drive according to the following procedures and Figures 4-15
and 4-16.
1. Remove the two M2x8 black bind screws.
2. Remove the connector cover and connector from the DVD-ROM drive.
Figure 4-16 Removing the connector from the DVD-ROM drive
3. Remove the five M2x3 white super flat-head screws.
4. Remove the frame.