Toshiba TECRA S1 - page 182

4 Replacement Procedures 4.6 Touch Pad
4-34 TECRA S1 Maintenance Manual
Assembling the Touch Pad
Assemble the touch pad according to the following procedures and Figures 4-19 and 4-20.
1. Place the touch pad in the correct position and fasten the following 2 latches.
2. Place the touch pad holder in the correct position and slide it in.
3. Push it until it into place.
4. Secure it with the two M2x3 white flat-head screws.
5. Connect the touch pad cable to the connector CN1 on the touch pad.