3.7 Storage

3 Diagnostic Programs

3.Audio CD Play

This test item is to check whether the audio play normally. It needs an audio CD.

Start/End Track Number-- Specify the Track range to be played;

Time (1-20)-- Specify the time each track to be played.

4.Data CD Butterfly Seek

Check the seek function of the CDROM drive. It will perform a serial of seeking operations. First locate the minimum LBA address, then the maximum, the sub- minimum, the sub-maximum and meet at center point. This test needs a data CD.

5.Data CD Random Seek

Check the random seek function of CDROM drive. Random access will reflect the performance of the heads’ random movement and seek. It tests 1000 times.

6.Data CD Sequence Seek

Check the sequential seek function of CDROM drive. Perform location test to CD-RW under LBA mode with the location address increasing in sequence.

7.CDRW Write Test

Check the write function of CDRW drive. The CDRW disk must be formatted with Direct CD format.

8.Tray Eject Test

Check the eject function of the CDROM. It will eject the CDROM and ask the user to confirm if operation success.

TECRA S1Maintenance Manual

39

Page 113
Image 113
Toshiba TECRA S1 manual Storage Diagnostic Programs