JVC Discover the AUDIO Menu Features of the DXU20 Stereo System

AUDIO menu

Item

Contents

DIGITAL AUDIO OUTPUT	Set this item correctly when using the OPTICAL DIGITAL OUTPUT terminal on the rear.
	PCM ONLY: When connecting to audio equipment which is compatible with only linear PCM signals.
	DOLBY DIGITAL/PCM: When connecting to a Dolby Digital decoder or an amplifier with
	built-in Dolby Digital decoder.
	STREAM/PCM: When connecting to a DTS/MPEG Audio decoder or an amplifier with built-in DTS/
	MPEG Audio decoder.
D. RANGE COMPRESSION	You can enjoy a powerful sound at a low volume level while playing Dolby Digital software.
	AUTO: Select to apply the compression only to multi-channel encoded audio (except for 1-channel and
	2-channel sources).
	ON: Select this to always apply the compression.

SPK. SETTING menu

Item

Contents

LEVEL		Select this item, then press ENTER/SET to show the LEVEL submenu for adjusting the speaker output
L E V E L		level.
		FRONT LEFT/RIGHT SPEAKER, CENTER SPEAKER, SURROUND RIGHT/LEFT
FRONT LEFT SPEAKER	0dB
FRONT RIGHT SPEAKER	0dB	SPEAKER: Select the speaker, then adjust the output level (–6 dB to +6 dB in 1 dB steps).
CENTER SPEAKER	0dB
		TEST TONE: Turns on/off the test tone.
SURROUND RIGHT SPEAKER	0dB
SURROUND LEFT SPEAKER	0dB	• Select “ALL CH ST,” “MUSIC,” or “MOVIE” (see page 15) to adjust the output level for all speakers
TEST TONE	OFF
		with the test tone.
DELAY		Select this item, then press ENTER/SET to show the DELAY submenu for adjusting the speaker delay
DELAY		time.
FRONT LEFT SPEAKER	0 ms	FRONT LEFT/RIGHT SPEAKER, CENTER SPEAKER, SURROUND RIGHT/LEFT
FRONT RIGHT SPEAKER	0 ms	SPEAKER: Select the speaker, then adjust the delay time (0 ms to 15 ms in 1 ms steps).
CENTER SPEAKER	0 ms
		• Set one speaker to “0 ms,” then set other speakers so that the sound from all speakers can reach you
SURROUND RIGHT SPEAKER	0 ms
SURROUND LEFT SPEAKER	0 ms	at the same time.

OTHERS menu

Item	Contents
RESUME	You can select Resume.
	ON: The System resumes playback from the position where playback has been stopped (not applicable
	for CD).
	OFF: Resume is deactivated.
ON SCREEN GUIDE	Activate or deactivate the on-screen guide.
	ON: Activate the on-screen guide.
	OFF: Deactivate the on-screen guide.
DivX REGISTRATION	The System has its own Registration Code.
	If necessary, you can confirm it.
	Once you have played back a DivX file in which the Registration Code is recorded, the System’s
	Registration Code is overwritten for copyright protection.

45