4.8 Wireless LAN Card

4 Replacement Procedures

4.8Wireless LAN Card

Removing the Wireless LAN Card

Remove the wireless LAN card according to the following procedures and Figures 4-22.

CAUTION: Do not touch the connectors on the wireless LAN card and in the computer with bare hands. Wireless LAN cards can fail if they are contaminated with sweat, natural oils, etc. from your hands.

1.Disconnect the two antenna cables with the tweezers.

2.Spread out both the left and right stoppers for fixing the wireless LAN card until the card can be raised.

Figure 4-22 Removing the wireless LAN card

3. Pull the wireless LAN card up and out at an angle.

TECRA S1 Maintenance Manual

4-37

Page 185
Image 185
Toshiba TECRA S1 manual Wireless LAN Card Replacement Procedures, Removing the Wireless LAN Card