Toshiba TECRA S1 manual 08xx LAN Card

3 Diagnostic Programs 3.11Error Codes and Description

	12	Modem Status Change	The Modem Status Change	As above.
		Interrupt Error	Interrupt cannot be invoked.
				1) Whether the COM PORT does
			1) UART version is below 16550	not support FIFO, this test should
	13	FIFO Disable Over Time	and does not support FIFO.	be ignored.
				2)	Check for the external fixture
		Error	2) COM PORT FIFO does not
				on the COM PORT;
			perform normally.
				3)	Try with other test software;
				4)	Replace the SUPPER IO chip.
	14	FIFO Cannot Enable Error	As above.	As above.
	15	FIFO Touch off Over	As above.	As above.
		Time Error
			The Data Receive Check of	1)	Check for the external fixture
	16	Data Received Check		on the COM PORT;
			COM PORT does not perform
		Error		2)	Try with other test software;
			normally.
				3)	Replace the SUPPER IO chip.
	17	Data Receive Error	The Data Receive of COM	1)	Try with other test software;
			PORT does not perform
				2)	Replace the SUPPER IO chip.
			normally.
				1)	Check whether the external
		RTS-CTS Connection	There is OC with the RTS-CTS	fixture of correct version is
	18			connected.
		Test Error	pins.	2)	Try with other test software;
				3)	Replace the SUPPER IO chip.
	19	DTR-DSR Connection	There is OC with the DTR-DSR	As above.
		Test Error	pins.
08xx		LAN Card
	01	PCI bus Error during	Don’t Scan PCI device	Don’t support PCI BIOS
		device ID test
	02	PCI Ethernet card not	Don’t find Net card	Please insert Net cad
		present during device ID
		test
	03	Intel PCI Ethernet card	Don’t found Net Card, This Card	Please update netcard or use other
		not present during MAC	can’t be Read MAC by this	method
		test	method
09xx		Keyboard
	01	Keyboard Map & Stroke	Keyboard Map & Stroke Test	Check the KBD connection and
		Test Fail	fails.	repeat the test.
	02	LED Flash Test Fail	LED Flash test fails.	As above.
	03	Clock Line Test Fail	Clock Line Test fails.	As above.

64 TECRA S1Maintenance Manual