Toshiba TECRA S1 manual Com

3.11Error Codes and Description 3 Diagnostic Programs

	13	OFF Line	No papers in the printer.	Check and see whether the printer
				is connected to the computer.
	14	Power OFF	No papers in the printer.	Check and see whether the printer
				is supplied with power.
	15	No Printer Found.	Unrecognizable printer type.	Test with another type of printer.
	16	Line Trouble	Line problems or other with the	Check for the printer on LPT,
				make sure it's correctly
			printer.	connected.
12xx		COM
	01	DLL Test Error	The DLL register of COM PORT	1)	Try with other test software.
			does not perform normally.	2)	Replace the SUPER IO chip.
	02	DLM Test Error	The DLM register of COM	As above.
			PORT does not perform
			normally.
	03	LCR Test Error	The LCR register of COM PORT	As above.
			does not perform normally.
	04	IER Test Error	The IER register of COM PORT	As above.
			does not perform normally.
	05	MCR Test Error	The MCR register of COM	As above.
			PORT does not perform
			normally.
	06	Transmit Buffer Empty	COM PORT data transfer out of	As above.
		Over Time Error	time.
				1)	Check for the external fixture
	07	Data Ready Over Time	COM PORT data receive out of	on COM PORT.
		Error	time.	2)	Try with other test software.
				3)	Replace the SUPPER IO chip.
	08	IRQ3 Not Happen Error	The COM PORT interrupt	1)	Try with other test software.
			occupying IRQ3 can not be
				2)	Replace the SUPER IO.
			recognized by the system.
			The COM PORT interrupt
	09	IRQ4 Not Happen Error	occupying IRQ4 can not be	As above.
			recognized by the system.
	10	Transmit Buffer Empty	The Transmit Buffer Empty	As above.
		Interrupt Error	Interrupt can not be invoked.
				1)	Check for the external fixture
	11	Data Receive Ready	The Data Receive Ready	on the COM PORT;
		Interrupt Error	Interrupt can not be invoked.	2)	Try with other test software;
				3)	Replace the SUPPER IO chip.

TECRA S1Maintenance Manual 63