Panasonic AW-RL400, AW-RC400, AW-RP400 manual $ Mounting the camera, Indoor Pan/Tilt Head AW-PH400

Indoor Pan/Tilt Head AW-PH400

Installation (Be sure to ask your dealer to install the unit.)

$ Mounting the camera

When mounting the camera on the pan/tilt head, be very careful to ensure that the camera does not fall off or fall down.

1Mount the lens onto the convertible camera. (Before mounting a large lens, consult with your dealer.)

2Insert the rubber piece between the camera and pan/tilt head, and mount the convertible camera after aligning it with the guide pins. Use a tool to tighten up the mounting screws so that they are securely tightened.

For a stand-alone installation

Set the guide pin.

Mount the camera with the mounting screws.

Rubber piece

Mounting screws

AW-PH400

For installation on the ceiling

Set the guide pin.

Mount the camera with the mounting screws.

Rubber piece

Mounting screws

❈Be absolutely sure to use a screwdriver or other tool to tighten the two camera mounting screws so that the camera is secured firmly.

❈After the camera has been mounted, check that there is no play in the way it was mounted.

17