Panasonic AW-RC400, AW-PH400, AW-RL400, AW-RP400 How to change the position of the connector panel

Pan/Tilt Control Panel AW-RP400

How to change the position of the connector panel

The position of the connector panel can be changed from the rear panel to the bottom panel.

❈Before changing the position, turn off the power.

Screws!5 (bottom panel)

1Remove the five bottom panel screws, and remove the blank panel.

Remove the blank panel.

Screws!5 (rear panel)

2Remove the five rear panel screws, and remove the connector panel.

3Secure the blank panel to the rear panel using the screws.

4Remove the two rubber feet from the blank panel.

5Secure the connector panel to the bottom panel using the screws.

Remove the connector panel.

Screws!5 (rear panel)

Blank panel

Remove the two rubber feet.

Screws!5 (bottom panel)

Connector panel

34