Manuals / Panasonic / Photography / Camcorder Accessories

Panasonic AW-RP400 J Y connector Y, K 1394 connector, L SDI connector SDI, O Pb connector Pb

Models: AW-PH400

1 64

Download 64 pages 39.52 Kb

Page 11

JY connector [Y]

Parts and their function

JY connector [Y]

This is the output connector for the camera’s video signals.

It is connected to the Y/VIDEO connector on the AW-RC400 cable compensation unit or monitor, etc. Use a BNC coaxial cable for the connecting cable. The AW-PB302 RGB card must be installed if the AW-E300, AW-E300A, AW-E600, AW-E800 or AW-E800A convertible camera is to be used.

K1394 connector [1394]

This is used for the control of the convertible camera and pan/tilt head equipped with an IEEE1394 card such as the AW-PB310.

Use an IEEE1394 cable for the connecting cable.

LSDI connector [SDI]

This is the output connector for the camera’s video signals.

When the AW-PB504 SDI card or other card is inserted in the convertible camera for use, SDI signals can be output.

Use a BNC coaxial cable for the connecting cable.

MG/L IN connector [G/L IN]

This is the genlock signal input connector.

It is connected to the G/L OUT connector on the AW-RC400 cable compensation unit or other unit. Use a BNC coaxial cable for the connecting cable.

NPROMPTER IN connector [PROMPTER IN]

The video signals for the prompter are input to this connector.

Use a BNC coaxial cable for the connecting cable.

OPb connector [Pb]

This is the output connector for the camera’s video signals.

It is connected to the Pb connector on the AW-RC400 cable compensation unit or monitor, etc.

Use a BNC coaxial cable for the connecting cable.

PPr/C connector [Pr/C]

This is the output connector for the camera’s video signals.

It is connected to the Pr/C connector on the AW-RC400 cable compensation unit or monitor, etc.

Use a BNC coaxial cable for the connecting cable.

Indoor Pan/Tilt Head AW-PH400

AW-PH400

11

Image 11

Panasonic AW-RP400 J Y connector Y, K 1394 connector, L SDI connector SDI, M G/L IN connector G/L IN, O Pb connector Pb

Contents

AW-RL400 AW-PH400AW-RP400 AW-RC400Models AW-RP400, AW-RC400 only Safety precautionsThis class A digital apparatus complies with Canadian ICES-003 1 indicates safety information Safety precautionsIMPORTANT SAFETY INSTRUCTIONS Accessories ContentsSafety precautions Operating precautions≥ Handle the units carefully Operating precautions≥ Turn off the power before connecting or disconnecting the cables ≥ Do not use the units outdoors ≥ MaintenanceIntroduction AccessoriesPrecautions for use Wire mounting screws with flat washers, spring washersAW-PH400 Installation precautionsIndoor Pan/Tilt Head AW-PH400 Indoor Pan/Tilt Head AW-PH400 Parts and their functionK L M N O P Parts and their functionB OPTION connector OPTION E ND/EXT connector ND/EXT@ SDI IN connector SDI IN A LENS I/F 2 connector LENS I/FM G/L IN connector G/L IN J Y connector YK 1394 connector L SDI connector SDI$ Assembling the pan/tilt head Installation Be sure to ask your dealer to install the unitFor a stand-alone installation For installation on the ceilingAW-PH400 3 Mounting the tally lampInstallation Be sure to ask your dealer to install the unit Indoor Pan/Tilt Head AW-PH400Installation Be sure to ask your dealer to install the unit $ Setting the mounting direction switchFor stand-alone installation For installation on the ceiling≥ IEEE1394 card support IP/IEEE switch IEEE 422/IP switch $ Setting the PCB switches≥ Analog/SDI support IP/IEEE switch IEEE 422/IP switch ≥ Web card support IP/IEEE switch IP 422/IP switch IPFor installation on the ceiling $ Installing the pan/tilt headInstallation Be sure to ask your dealer to install the unit For a stand-alone installationFor installation on the ceiling $ Mounting the cameraInstallation Be sure to ask your dealer to install the unit For a stand-alone installationInstallation Be sure to ask your dealer to install the unit $ Attaching the wire≥ Camera AW-E750 ≥ Camera AW-E650, AW-E350Replacing the consumable parts $ Replacing the battery$ How to remove the battery $ How to install the batteryStorage temperature SpecificationsPower consumption Ambient operating temperature 32F to 113F 0C to +45CAW-PH400 MEMORack-mounting adaptors Zoom switchPan/Tilt Control Panel AW-RP400 Plug D-SUB 15-pin for tally/INCOM system= ? @ A B C D 1EXT CONT M/S switch3 OPERATE OFF/ON switch $ Front panelFOCUS indicator PAN POSITION indicatorIRIS indicator = ZOOM indicatorD LCD panel C PRESET MEMORY selection buttons 1 toL PAN/TILT lever/ROTATION control switch B MEMORY button$ Rear panel M EXT CONT IN/OUT connectorsN CAMERA CONTROL IN FROM RCB P1 to P5 connectors O TALLY/INCOM connectorT CAMERA CONTROL IN FROM ROP connector P REMOTE connectorR CONTROL OUT TO PAN/TILT HEAD P1 to P5 connectors S MONI SEL OUT connectorAW-RP400 P/T CONTROL PANEL Menu settings$ Operation method Pan/Tilt Control Panel AW-RP400Menu item $ List of menu items and settingsSetting PRIORITY MASTER/SLAVEIRIS CONTROL setting BOTH/RP400/CB400 TILT RANGE setting 190/300 degreesSPEED WITH ZOOM POS. setting OFF/1/2/3 PRESET SPEED setting 1 toMenu settings OPTION SWITCH A to H settingsMEMORY LENGTH setting 60s/120s/300s/600s NOT USE / DEF / WIP / HEATER/FAN / LAMP / OPTION / ND / EXT / AFSD CARD setting CONTROL SELECT MODE setting INTERLOCK/UN-INTERLOCKBUZZER setting OFF/ON AUTO RUN setting START No., END No., INTERVALAW-RP400 How to mount the AW-RP400 in a rackAccessory mounting screws M4!8 mm 4 pcs Pan/Tilt Control Panel AW-RP400Pan/Tilt Control Panel AW-RP400 How to change the position of the connector panelBefore changing the position, turn off the power RP400-AW How to replace the zoom switchBefore replacing the zoom switch, turn off the power 4 Secure the zoom switch using the four screwsReplacing the consumable parts The joysticks and zoom switch are consumablesAsk your dealer to do the replacement work Replace them if they are not working properlySwitch functions Input connectorsOutput connectors Input/output connectorsRack-mounting adaptors Cable Compensation Unit AW-RC400Accessories Introduction6 SHORT/LONG selector switch 1 Power LED2 POWER switch 3 Cable length setting switches 0 toPb IN connectors 1 to MONITOR1, 2 connectorsY/VIDEO IN connectors 1 to = Pr/C IN connectors 1 toAW-RC400 How to mount the AW-RC400 in a rackCable Compensation Unit AW-RC400 Specifications Power consumption Approx. 9 WAmbient operating temperature DC 12.0Introduction Pan/tilt head connecting cableAccessories AW-RL4003 Camera mounting plate A B 6 Pan/tilt head connectorRoll Unit AW-RL400 1 Rotary ring 2 Camera mounting screw U1/4”-20UNCRoll unit Rotary arm InstallationRoll Unit AW-RL400 AW-RL400Roll Unit AW-RL400 When the AW-E750, AW-E650 or AW-E350 is used as the cameraWhen the AW-E655 is used as the camera InstallationAW-RL400 InstallationOPTION connector Lens cable Pan/tilt head connecting cable Roll Unit AW-RL400Performance Pan/tilt head connectorDC 24 Approx. 24 WConnections Camera cable supplied with AW-PH400 Pan/tilt head/camera control signalsMonitor switching signals ConnectionsRemote Example of system configurationCable provided with AW-CB400 Pan/Tilt Control PanelNow proceed with the settings for the AW-RP400 pan/tilt control panel Operating procedures$ Turning on the power $ Providing cable compensation for the cameras Waveform monitor composite signalsWaveform monitor component signals Make these adjustments using the AW-RC400 cable compensation unitPerform these settings on the AW-RP400 pan/tilt control panel $ Genlock adjustments for the respective cameras$ Video adjustments for the cameras $ Tracing memory settingsOperating procedures Playing the tracing memory dataErasing the tracing memory data $ Setting the preset memory dataRegistering the preset memory data Changing the tracing memory dataOperating procedures Playing the preset memory data10336-52F0-008 made by Sumitomo 3M Cable specificationsWhen an IAS, WAS or VAS lens analog drive made by Canon is used 10336-52F0-008 made by Sumitomo 3M When an IASD, WASD or VASD lens digital drive made by Canon is usedCable specifications 10336-52F0-008 made by Sumitomo 3M When an RD lens made by Fujinon is usedCable specifications Page Page