Panasonic AW-PH400, AW-RC400, AW-RP400 Installation, Roll Unit AW-RL400, Roll unit Rotary arm

Roll Unit AW-RL400

Installation

1Attach the pan/tilt head’s rotary arm to the roll unit using the three mounting screws (M5!22 mm, with flat washers, pan/tilt head accessory).

2Attach the rotary arm to the pan/tilt head using the mounting screws (M5!22 mm, with flat washers, pan/tilt head accessory).

Roll unit

Rotary arm

Camera mounting plate (consisting of 2 separate sub plates)

AW-RL400

3Loosen the two screws of camera mounting plate which is already installed to the roll unit. Then remove the camera mounting plate.

Camera mounting plate (consisting of 2 separate sub plates)

Screws

❈When assembling the units, use the Allen key (provided), wrench and screwdriver, and secure the units by tightening the screws firmly. After mounting the units, check there is no play in the way they are mounted.

45