4.2 Cooling Module

4 Replacement Procedures

Installing the Cooling Module

Install the cooling module according to the following procedures and Figures 4-7, 4-8 and .

CAUTION: When installing the cooling module, keep the following in mind:

1.Be sure to confirm the correct position for the module.

2.Route the cooling module cable between the module and MDC card.

3.Please according to the number sequence sealed on heatsink module and secure the relevant screws on the mainboard.

NOTE: Apply silicon greases with a special syringe to cover the surface of the CPU chip completely.

CPU chip

Figure 4-8 Applying silicon greases

TECRA S1 Maintenance Manual

4-19

Page 167
Image 167
Toshiba TECRA S1 manual Cooling Module Replacement Procedures, Installing the Cooling Module