Toshiba TECRA S1 manual Removing the Optional Memory, Removing the memory cover

4 Replacement Procedures 4.1 General

Removing the Optional Memory

Remove the optional memory (module) according to the following procedures and Figures 4- 3 and 4-4, after checking that the computer is turned off in boot mode.

CAUTION: Remove the optional memory after turning off the computer. If this is violated, the computer or memory can be damaged.

1.Turn the computer upside down.

2.Remove one M2.5x4 black bind screw.

3.Remove the memory cover.

CAUTION: Do not touch the connectors on the memory modules or in the computer. Contaminated connectors can cause memory access problems.

Figure 4-3 Removing the memory cover

4-12 TECRA S1 Maintenance Manual