Toshiba TECRA S1 manual Lpt

3 Diagnostic Programs 3.11Error Codes and Description

	26	8bits Video Mode Test	As above.	As above.
		Error
	27	15bits Video Mode Test	As above.	As above.
		Error
	28	16bits Video Mode Test	As above.	As above.
		Error
	29	24bits Video Mode Test	As above.	As above.
		Error
	30	32bits Video Mode Test	As above.	As above.
		Error
31xx		Audio
	01	Audio Play Fail	Cannot play music.	Check the Audio connection,
				replace the external fixture, and
				repeat the test.
	02	Record Fail	Cannot record.	As above.
11xx		LPT
	01	Data Register Error	The data register can not perform	Check the external fixture and
			normally.	BIOS setup, and repeat the test.
	02	Control Register Error	The control register can not	As above.
			perform normally.
	03	Does not Support ECP	LPT does not support ECP mode.	Check the BIOS setup, and repeat
		Mode(Ver3.20)		the test.
	04	FIFO Test Error	LPT cannot perform normally	As above.
			under FIF0 TEST mode (ECP
			internal mode).
	05	IRQ Active Error	1.LPT IRQ cannot be activated.	Check the external fixture and
			2. The external fixture does not	BIOS setup, and repeat the test.
			match with the chosen version.
	06	No Fixture On The Port	No external fixtures on LPT port.	As above.
			1. There is OC (Open Circuit) or
	09	CTR/STR Connection	SC (Short Circuit) on the LPT	Check the external fixture and the
			port CTR/STR.2. The external
		Error		port pins, and repeat the test.
			fixture does not match with the
			chosen version.
	10	DTR/STR Connection	As above.	As above.
		Error
	11	Toshiba Fixture Error	As above.	As above.
	12	No Paper	No papers in the printer.	Check for papers in the printer.

62 TECRA S1Maintenance Manual