4 Replacement Procedures 4.17 LCD Module
4-60 TECRA S1 Maintenance Manual
Removing the 14.1-inch LCD Module
Remove the 15.0-inch LCD module according to the following procedures and Figures 4-41,
4-42 and 4-43.
1. Remove the two M2.5x3.5 black flat-head screws and two M2x5 white bind screws
for fixing the LCD module.
2. Carefully tilt the LCD module toward you.
3. Remove the four M2x3 white bind screws on each of the left and right sides for fixing
the LCD bracket.
Figure 4-41 Removing the 14.0-inch LCD module and screws