4 Replacement Procedures

4.6 Touch Pad

Figure 4-18 Removing the touch pad

Installing the Touch Pad

Install the touch pad according to the following procedures and figure 4-17and 4-18.

1.Connect the touch pad cable to the connector CN8.

2.Fasten the touch pad 5 bottom latches in the correct position.

3.Place the touch pad in the correct position and fasten the following 15 latches, in that order:

-One latch on the left and three latches on the right sides

-Six top latches

-Five bottom latches

4-32

TECRA S1 Maintenance Manual

Page 180
Image 180
Toshiba TECRA S1 manual Replacement Procedures Touch Pad, Installing the Touch Pad