Installation
[Blank channel]
The Blank channel function disables the display of video on the TV, but does not affect the audio output. This function can be used for audio applications (example:
1Enters the [Blank channel], the list of all channels appear.
2Selects one or more channels and press OK to mark.
3The channels marked with [X] will not display video on the TV.
[Disable auto updating]
[Software]: Disables automatic TV software update via OAD (On the air software download).
[Channel]: Disables automatic channel installation when new channels are detected.
[Both]: Disables automatic update of the TV software and the channel installation.
[Off]: Enables automatic update of the TV software and the channel installation.
[Skip scrambled signals]
[Off]: Allows scrambled channels in the channel list.
[On]: Skips the scrambled channels in the channel list.
[Multi remote control]
Guest remote control supports up to four televisions operating in one room without interference from each other’s remote controls. Each TV and the Guest remote control can be set to match each others.
1Enters [Multi remote control] and designate one colour (Blue / Green / Yellow / Red) to the TV. Selects [Off] to disable [Multi remote control] function.
2Sets the Guest remote control to the corresponding colour by pressing
MENU and one of the colour button simultaneously for more than 4 seconds.
3The Guest remote control can operate the TV with the corresponding colour.
Note
EXAMPLE: Press MENU and Red button simultaneously on the Guest remote control for more than 4 seconds to operate the TV with [Red] colour selected in [Multi remote control] menu.
Guest remote control will be set to default Blue colour after replacing batteries.
[MyChoice]
[Off]: Disables MyChoice function.
[On]: [MyChoice] appears in the Guest home menu.
Press MENU > [MyChoice] and enters authorized PIN code to watch MyChoice channels.
English
EN 39