Use timers
You can set timers to switch the TV to standby
Tip
Set the TV clock before you use timers.
Automatically switch the TV to standby (sleep timer)
Sleep timer switches the TV to standby after a
Tip
You can switch off your TV earlier or reset the sleep timer during the countdown.
Press SLEEP on the Guest remote control to quick access the Sleep timer menu.
1Press MENU.
2 Press to select [Setup] >
[Features] > [Sleep timer].
»The [Sleep timer] menu appears.
3 Press to select a value between zero and 180 minutes.
»The sleep timer can be set in steps of
timer is switched off.
4Press OK to switch on the sleep timer. » The TV switches to standby after the
Automatically switch the TV on (on |
|
timer) | English |
|
mode.
1Press MENU.
2 Press to select [Setup] >
[Features] > [On timer].
3 Press to enter the [On timer] menu. [Activate]: Selects how often the TV is switched on.
[Time]: Sets the time to switch on the TV.
[Programme no.]: Selects the channel or the connected device.
4Press EXIT to exit.
Tip |
Select [On timer] > [Activate] > [Off] to |
disable this feature. |
Use TV locks
You can prevent your children from watching certain programmes or channels by locking the TV controls.
Set or change your PIN code
1Press MENU.
2 Press to select [Setup] >
[Features] > [Set code] / [Change code].
»The [Set code] / [Change code] menu appears.
3Enter your code using the Numeric buttons.
»Follow the
Tip
If you forget your code, enter ‘8888’ to override any existing codes.
EN 21