Use a Conditional Access Module
A Conditional Access Module (CAM) is provided by digital TV service operators to decode digital TV channels.
Note
Refer to the documentation from your service operator on how to insert a smart card into the Conditional Access Module.
Insert and activate a CAM
Caution
Be sure to follow the instructions described below. Wrong insertion of a CAM may damage both the CAM and your TV.
1Switch off the TV and disconnect it from the power outlet.
2Following the directions printed on the CAM, gently insert the CAM into the COMMON INTERFACE at the side of the TV.
Access CAM services
1After inserting and activating the CAM, press MENU.
2 Press to select [Setup] >
[Features] > [Common interface].
»Applications provided by the digital TV service operator appear on the screen.
Note
This menu option is available only if the CAM is inserted and activated correctly.
English
3
4
5
Push the CAM in as far as it will go.
Reconnect the TV to the power outlet.
Turn on the TV and wait for the CAM to be activated. This may take several minutes. Do not remove the CAM from the slot when in use — removing the CAM will deactivate digital services.
EN 45