PBS settings
[PBS mode]
Enables / disables the Professional mode. [On]: All settings in the Professional mode Setup menu are in effect. [Off]: The TV operates as a normal (consumer) TV.
[Consumer setup]
A shortcut to enter the full TV menu.This allows the installers to do all the TV setup settings.
[USB to TV]
video, audio, channel Table, and Professional mode settings) from a USB device to the TV set.
[TV to USB]
video, audio, channel Table, and Professional mode settings) from the TV set to a USB device.
[Reset]
Selects [Yes] to reset all settings in Professional mode to factory default.
Switch on setting
[Max volume]
volume level of the TV.
[Switch on picture format]
Sets available picture format when the TV is switched on.
Note
If the picture format is not supported with the activated source, [Auto format] detection is applied.
[Power on]
The power on function allows the TV to enter [On], [Standby], or [Last
status]) of operation after the mains power is activated.
[On]: When set, the TV will always turn on after the mains power is activated.
[Standby]: When set, the TV will always turn to standby after the mains power is activated.
[Last status]: When set, the TV will always turn to the last status (either On or Standby) whenever the mains power is activated.
[Smart power]
Adjusts the picture backlight to achieve the following power saving mode.
[Off]: Smart power is disabled. ([Custom] mode is applied).
[Low]: The picture backlight is at low power saving mode. ([Cinema] mode is applied).
[Medium]: The picture backlight is at medium power saving mode. ([Standard] mode is applied).
[High]: The picture backlight is at high power savings mode. ([Energy saving] is applied).
English
EN 35
