3.11Error Codes and Description 3 Diagnostic Programs
TECRA S1Maintenance Manual 65
04 Data Line Test Fail Data Line Test fails. As above.
05xx Mouse
04 PS2 Mouse Test Fail PS2 Mouse Test fails. Replace the mouse.
05 Dual Point Test Fail Dual Point Test fails. Check the mouse connection and
repeat the test.
30xx SDCard
01 PCI Device No Exist SD Card controller does not
exist. Install the SD Card controller.
02 SD Card No Exist No SD Card is inserted. Insert the SD Card.
03 Initial SD Card Error No SD Card is insertedor the SD
Card is damaged.
Replace the SD Card and repeat
the test.
04 Write SD Card Error As above. As above.
05 Read SD Card Error As above. As above.
06 Compare data Error As above. As above.
07 Lock Function Fail As above. As above.
14xx IrDA Test
01 2400BPS Test Error
Failure with the infrared port or
the configuration program is not
executed.
Rerun the configuration program
or check the infrared port.
02 4800BPS Test Error As above. As above.
03 9600BPS Test Error As above. As above.
04 19200BPS Test Error As above. As above.
05 38400BPS Test Error As above. As above.
06 57600BPS Test Error As above. As above.
07 115200BPS Test Error As above. As above.
08 0.576MBPS Test Error As above. As above.
09 1.152MBPS Test Error As above. As above.
10 4.000MBPS Test Error As above. As above.
11 Connect time out
Failure with the infrared port or
the configuration program is not
executed.
Rerun the configuration program
or check the infrared port. Check
the master.
20xx IDE-HDD
01 Get Parameter Fail ! Wrong test parameters are input
by user. Reinput the correct parameters.
02 Write Pattern Error HD is damaged. Send the HD for repair.
03 Data Compare Error HD is damaged. As above.
04 Read Verify Error HD is damaged. As above.