3 Diagnostic Programs

3.7 Storage

Retry--Specify the maximum retrying times whether the operation fails.

4.Controller Check

Check the HDD controller’s status, including HDD interrupt and unexpected interrupt.

5.Diagnostic Read/Write

This test item is a quick test to verify whether the HDD could be correctly accessed and the user could specify the percentage in the below dialog.

Percent (1-100)-- Specify the coverage rate in percentage of the total disk.

6.SMART Test

SMART stands for Self-Monitoring, Analysis and Reporting Technology. SMART test will compare the attribute values with the threshold value in the HDD’s controller to confirm whether there is any failure in the HDD

Subtest 02 CDROM

The CDROM test runs on IDE CDROM/DVD-ROM & CD-RW, it will check the CDROM driver’s functionality and performance.

1.Controller Test

Check the CDROM controller’s status.

2.Data Transfer Rate

Check the data transfer rate of the CDROM drive. It will read data from the CDROM disc and calculate the data transfer rate. This test needs a data CD.

38

TECRA S1Maintenance Manual

Page 112
Image 112
Toshiba TECRA S1 manual Subtest 02 Cdrom