Toshiba TECRA S1 manual Diagnostics Windows, Test Running Status and Report Panel, Title Bar

3.2 Quick Start 3 Diagnostic Programs

1. Diagnostics Windows

When a test item is running, a Diagnostics Windows is displayed in full screen. It consists of the following parts: Title Bar, Test Running Status and Report Panel, Status Bar. There would prompt a message box called USER BREAK in the central of the window whether user press ESC to interrupt the test.

2. Test Running Status and Report Panel

Test Running Status and Report Panel is located on the middle of Diagnostics Windows.

Test item name, test process and test result are displayed in the left;

Test status and result are displayed in the upper right corner of the screen. It displays the test status of the current test item – TEST (in testing), PASS (test finished and its result is passed), FAIL (test finished and its result is failed) and SKIP (test skipped).

The error list of each test module is displayed at the lower right corner of the screen. It would display the total error quantity found in the test, the most recent five error codes and description would be shown here. Detailed error report could be viewed with Logview.exe.

When pressing ESC key during the test process , a User Break Windows will be popped up for the user to select.

3. USER BREAK

Pressing ESC key to interrupt the test, USER BREAK message box would be prompted out in the central of Diagnostics Window for the user to select the following actions:

CONTINUE---- Continue the test;

SKIP---- Stop the sub-item of current test item to go to the next item’s test;

ABORT----Stop the current test item to test the next module.

ABORT ALL---- Stop all the selected test items. User could use the hot key Ctrl+D to

achieve the same operation. When the user calls ABORT ALL, the following message box will prompt for his selecting.

4. Title Bar:

Title Bar located at the top of the window, it includes information as follows:

TECRA S1Maintenance Manual 11