Paradyne 6212 manual Chapter Diagnostics, OAM Loopback

Chapter 7 Diagnostics

To access the Diagnostics screen, click on the Diagnostics button on the menu bar. The Diagnostics screen has two test functions: OAM Loopback and Ping test.

7.1OAM Loopback

STEP 1: click on the Diagnostics button, on the menu bar.

STEP 2: Click on the Loopback tab on the Diagnostics screen.

STEP 3: Enter the following information to run the OAM loopback:

Flow type: F5 SEG (Segment to Segment) and F5 ETE (End-to-End). The SEG loopback is from ATUR to DSLAM. The ETE loopback is from ATUR to the ISP RAS.

VPI and VCI: Specify the virtual channel that will run the OAM loopback.

Loopback ID: Type the loopback pattern for the loopback.

STEP 4: Click on the Start Loopback button at the bottom of the screen.

6212-A2-GB20-20 July 2004 79