Log Record From FTP

The following steps describe how to load the log file from FTP.

STEP 1: Connect the router to a PC using the LAN port. Set the PC to the same subnet as the router (the default router address is 192.168.1.1).

STEP 2: Start a Windows command prompt and enter the directory where you want to load the file.

STEP 3: At the prompt, type ftp followed by a space and the router’s IP address.

STEP 4: A welcome message appears. At the user prompt, type root (lowercase).

STEP 5: At the Password prompt, type the password; the default is 12345.

STEP 6: After you see the message User logged in, type: bin

STEP 7: After you see the message Type set to I, type: ha

STEP 8: After you see the message Hash Mark Printing On ftp, type: get logfile <filename.txt>

Example: get logfile adsl.ext

6212-A2-GB20-20

July 2004

87

Page 87
Image 87
Paradyne 6212 manual Log Record From FTP, Example get logfile adsl.ext