DE-22OP Series Ethernet Adapter / User’s | Guide |
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - | - - - |
Multiple-Adapter Installation
Multiple DE-220P Series cards may be installed in a computer to provide for multiple addresses, or in the case of a server, t o provide for network seg- mentation.
Multiple Cards in a PnP System
No special attention is needed when installing multiple DE-220P Series cards in a PnP-compliant system (so long as Plug and Play is enabled). In- stall the several cards into their expansion slots, following the four steps set, out in the “Single- Adapter Installation” section above (repeating steps 2 and 3 for each card). When computer
power is switched on, the PnP system will auto-
matically select coordinated (conflict,-free) configuration settings for the several cards.
3Plug and Play functionality of the NOS may be toggled between enable and disable by a selection in your setup.exe run.
I n s t a l l a t i o n | 2 - 9 |
