D-Link DE-220P manual Network Medium is Thin Coaxial Cable

DE-220P Series Ethernet Adapter / User’s Guide

---------_-------__---------------

2. The cable will have	an RJ-45	plug	on	each
end. Plug one end into	t h e RJ-45 receptacle of
t h e DE-220P Series	adapter,	and	plug	the

other end into an available		port, of a	lOBase-T
hub. Push each	RJ-45 plug into its		receptacle
until its retainer	snaps into	place.

The Network Medium is Thin Coaxial Cable

1.Connect, a BNC T-connector onto the BNC recep- tacle of the DE-220P Series card.

2.Connect, t h e network feed cable onto either open end of the BNC T-connector.

3a.	If the cable continues on to	an	additional station
	or stations, then connect. the continuation			cable
	onto the remaining open end of the BNC T -
	connector.
3b.	If the network cable does	not,	continue to	addi-
	tional stations (your computer is at, the end of the
	cable), then connect, a 50-ohm		terminator to t h e
	remaining open end of the BNC		T-conector.

2 - 1 4 /nsta//ation