4.4WAN Setup
Click on WAN Setup from the menu bar to configure the WAN interface for these services: RFC 1483 Bridged, RFC 1483 Routed, PPPoE, PPPoA, and MER. The following are the common settings to set up these services.
VPI and VCI
LLC Encapsulation: With LLC encapsulation, a link control header is added to the Ethernet packet that identifies the protocol type (Ethernet). This allows multiple protocols to be transmitted over the ATM Virtual Circuit.
VC Multiplexing: With VC Multiplexing, no link control header is needed as the ATM Virtual Circuit is assumed to be carrying a single protocol.
Enable NAPT: NAPT or Network Address Port Translation is explained further in section 5.7. This feature is available for RFC 1483 Routed, PPPoE, PPPoA, and MER.
July 2004 | 33 |
