Paradyne 6212 manual DHCP Relay, Disable the DHCP

5.3.2 Disable the DHCP

STEP 1: Click on DHCP from the menu bar.

STEP 2: Choose a DHCP entry, then click on Delete.

5.4DHCP Relay

The DHCP packet format is based on a BootP packet. As a result, DHCP uses the BootP relay agent to forward DHCP packets. This scheme provides interoperability between existing BootP clients and DHCP servers. The BootP relay agent uses the same criteria and methods for forwarding both DHCP and BootP packets. The DHCP Relay is disabled by default. To enable it complete the following steps:

STEP 1: Access the DHCP Relay screen by clicking on DHCP on the Advanced Menu, and then clicking on the DHCP Relay tab.

STEP 2: In the DHCP Relay field, select Enable, and enter the IP Address you want to receive BOOT REQUEST or DHCP packets from clients.

STEP 3: Click on the Apply button.

46 July 2004 6212-A2-GB20-20