3Com EISA 10/100BASE-T manual Enable the Group 3 test by selecting the Enable Group button

	Starting the Diagnostic Program	5-7
Table 5-1 Non-Bus Master Adapter and Diagnostic Program Names
Diagnostic Program Name	Adapter
3C503	EtherLink II® or II TP
	EtherLink II/16 or II/16 TP
3C505	EtherLink Plus®
3C507	EtherLink 16 or EtherLink 16 TP
3C5X9CFG	EtherLink III family
3C523	EtherLink/MC
3C523TP	EtherLink/MC TP
3C527	EtherLink/MC 32
3C59XCFG.EXE	EtherLink III EISA, EtherLink III PCI,
	Fast EtherLink PCI, and Fast EtherLink EISA

Starting the Group 3 Test

To run the Group 3 test on a Fast EtherLink EISA adapter, follow these steps:

1Start the Configuration and Diagnostic Program.

This program must be on the computer containing the adapter you want to test.

2Select Test Setup from the Test menu.

3Select Group 3 from the Group Select box.

4Enable the Group 3 test by selecting the Enable Group button.

5Select OK and press [Enter].

6Go to the Run Tests dialog box and select Start to start the tests.

7After the test is completed:

a End the program on the echo server. b Exit the diagnostic program.