![](/images/new-backgrounds/1272717/27271777x1.webp)
4-10 CHAPTER 4: LOADING NETWORK DRIVERS
2Select Configuration/Diagnostic/Troubleshooting, and press [Enter].
3In the next screen, select Configuration and Diagnostic Program, and press [Enter].
The next screen lists the installed adapters. Write down their slot numbers.
4Exit the program.
If you are using an ODI driver with multiple adapters already installed and you have not updated the NET.CFG file, specify which adapter you want the driver to recognize by adding the slot number to the NET.CFG file using the SLOT XXXX parameter, where XXXX is the slot number.
One EISA Adapter in a Server
If you are running NetWare and have installed a single adapter in an EISA computer that is functioning as a server, follow the instructions in this section to install the NetWare 4.x server driver.
The 3C59X EtherDisk diskette contains a NetWare 4.x server driver (3C59X.LAN) and the NetWare Loadable Modules (NLMs) that enable the NetWare 4.x driver to be used with NetWare 3.11, 3.12, or 4.0x software. These files are found in the \NETWARE\SERVER subdirectory.
NetWare Driver Installation
To install the 4.x server driver, follow these steps:
1Copy the contents of the appropriate \NETWARE\SERVER subdirectory to the boot partition of the server‘s hard disk.
The 3C59X EtherDisk diskette contains the NetWare 4.x server driver and the NetWare Loadable Modules (NLMs) that enable the NetWare 4.x driver to be used with NetWare 3.11, 3.12, 4.0x, or 4.1 software.