Fujitsu V6.0 manual Setting Port Numbers Used for Individual Services

Common Notes for Interstage

Setting Port Numbers Used for Individual Services

When port numbers are set or changed for Interstage Application Server services, unique port numbers must be set for all individual services including applications in the system. If services are operated with the same port number set for different services, normal operation cannot be performed (for example, a client may fail to access a service).

Table 3-1 lists the services and functions for which port numbers are set under Interstage Application Server. The table also lists the locations where the port numbers are set.

Table 3-1 Services/Functions for Which Port Numbers are Set

Service Name/	Port Number Setting Location
Function Name
Interstage	“Port number for Interstage management console”
Management	C:\Interstage\gui\etc\httpd.conf
Console
	- Port directive
Web server	“Port number for the entire Web server (Interstage HTTP server)”
(Interstage HTTP	Interstage Management Console
server)
	- [Services] > [Web Server] > [Web Server Settings] tab > [Port Number]
	Or
	The environment definition file (httpd.conf)
	- Port directive
	“Port number for the virtual hosts”
	Interstage Management Console
	- [Services] > [Web Server] > [Virtual Hosts] > [Create a new Virtual Host] > [IP
	Address] and [Port Number]
	Or
	Interstage Management Console
	- [Services] > [Web Server] > [Virtual Hosts] > [Virtual Host Name] >
	[Configuration] > [IP Address] and [Port Number]
	The environment definition file (httpd.conf)
	- Listen directive
	Note:
	Setting the Listen directive in the environment definition file (httpd.conf) invalidates
	the Port directive in the environment definition file (httpd.conf).
Web server	"Port number for Web server (InfoProvider Pro)"
(InfoProvider Pro)	InfoProvider Pro environment definition file
	- port

3-5