Chapter 3: Notes on Interstage Operation
Notes on the CORBA Service
This section provides additional information on the CORBA Service.
Notes on Installation and Environment Settings
1)When the CORBA Service is installed and linked to the Systemwalker/CentricMGR operation management tool, particular care is needed when stopping the CORBA Service and when setting up the environment uninstalling.
Stopping
The SystemWalker/CentricMGR operation management tool cannot be used when the CORBA Service (ObjectDirector) has been stopped
Setting Up the Environment
Setting up the CORBA Service environment may affect the SystemWalker/CentricMGR operation management tool if it is using ObjectDirector. Pay attention to the environments for this product when setting up the CORBA Service environment.
Uninstalling
The SystemWalker/CentricMGR operation management tool cannot be used when CORBA Service (ObjectDirector) has been uninstalled.
Refer to Notes for Installing SystemWalker/CentricMGR in the Installation Guide for the installation procedure.
2)When the odadmin_ex command is used to set up the environment in Windows® 2000, the following message may be displayed, indicating that environment setup has failed:
ObjectDirector environment setup failed Return code
2
Error details
odsetns : error occurred code = 402, 1072
Cannot execute command. : odsetns
In this case, run the process again and set up the environment correctly. If the Service property screen is displayed, close the screen and repeat the processing.