F
System configurator and
PRIMERGY TX150 S4 | Status 25.11.2005 |
Section VII
SCSI-Controller
All internal cables and adapters are included within the basic units and components respectively
Cabeling priorities:
internal HDs are cabled according to following priorities. (Prio 1 - 3 ):
1.) For a configuration without any Disk Array Controller and without zero channel RAID
the onboard U320 Controller is connected to the internal HDs.
2.) For a configuration with a
One channel will be connected with the internal hard disks.
The second channel is externally available.
internal backup devices are cabled according to following priorities. (Prio 1 - 2 ):
1) For a configuration without additional SCSI controller
the onboard U320 controller is connected to internal backup devices
2)For a configuration with Adaptec SCSI Card 29160
this controller is connected to internal backup devices
A.
Example for IME with 3 data devices:
LSI Integrated Mirroring Enhanced (IME) is a RAID 1 implementation (no RAID 0 support). It can be operated also with an odd number of hard disks (max. one RAID 1 Set). There are, depending on system, up to 6 hard disks, including a hot spare disk, possible. Supportet are only the operating systems Windows2000/2003 as well as SuSE and RedHat Linux.
All internal cables and adapters for the basic unit and for components are included.
1x per TX150S4
T26139-Y3849-L1
External
Cable and external connector interface (HD68)
occupies one connection panel
max. 1x per system for ext.
Only SX10 Backup is released for the external connection of the
Cable sold separately not mounted in factory. Use this cable only if
G
Fujitsu Siemens Computers | 12 of 18 |
Enterprise Products - PRIMERGY Server |