Fujitsu MHV2160BT manual Status Field contents, Disposition for Error Field contents

Maintenance and Diagnosis

			Table 1.1 Status Field contents
	bit		Contents
BIT0=1		Shown in Table 1.2
BIT1, 2		It is not necessary to take any measure when other bits are
		normal, in spite of these bits. (Normal)
BIT3=1		(1)	Check whether vibration is transmitted because of the way
BIT4=1			the disk drive is mounted.
BIT5=1 Any of these		(2)	Check the power, cable, and connector.
BIT6=0	cases.	(3)	If it is concluded that the disk drive is the cause, replace the
			disk drive.
BIT7=1

Table 1.2 Disposition for Error Field contents

	Error bit	Method of disposition
BIT0
BIT1	Any of these	If it is concluded that the disk drive is the cause, replace the
BIT4	bits are “1”.	drive.
BIT6
BIT4=1 and BIT2=1		(1) Check the status of the host system, cable, and drive.
or		(2) If it is concluded that the disk drive is the cause,
BIT3=1 and BIT2=1		replace the drive.
or
BIT2	Any of these
BIT7	bits are “1”.

1-10 C141-F076